LIST OF OSHA :
- OSHA 30-HOURS FOR CONSTRUCTION INSUDTRY
- OSHA 30-HOURS FOR GENERAL INDUSTRY
- OSHA 10-HOURS FOR CONSTRUCTION INDUSTRY
- OSHA 10-HOURS FOR GENERAL INDUSTRY
- OSHA 48-HOURS OCCUPATIONAL SAFETY AND HEALTH MANAGER
- 132-HOURS OCCUPATIONAL SAFETY AND HEALTH PROFESSIONALS
- 40-HOURS HAZWOPER
- 155-HOURS SPECIALIST (OIL & GAS INDUSTRY)
OSHA 30-HOURS FOR CONSTRUCTION INDUSTRY:
The 30-hour Construction Course is intended to provide a variety of training to workers with some safety responsibility. Training should emphasize hazard identification, avoidance, control and prevention, as well as OSHA standards. Instructional time must be a minimum of 30 hours.
The topic requirements are as follows:
Introduction to OSHA – 2 hours.
Managing Safety and Health – 2 hours.
OSHA Focus Four Hazards – 6 hours.
Personal Protective and Lifesaving Equipment – 2 hours
Health Hazards in Construction – 2 hours.
Stairways and Ladders – 1 hour.
Elective – 12 hours.
Optional – 3 hours.
OSHA 30-HOURS FOR GENERAL INDUSTRY :
The OSHA 30-hour General Industry Course has been designed to deliver various training to working professionals with health and safety responsibility. This training emphasizes learners to identify, prevent, control and avert hazards in workplace, as well as OSHA standards.
The topic requirements are as follows:
Introduction to OSHA – 2 Hours.
Managing Safety and Health – 2 hours.
Walking and Working Surfaces, including fall protection – 1 hour.
Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection – 1 hour.
Electrical – 2 hours. Personal Protective Equipment (PPE) – 1 hour. Materials Handling – 2 hours. Hazard Communication – 1 hour. Elective – 10 hours.
Optional – 7 hours.
OSHA 10-HOURS FOR CONSTRUCTION INDUSTRY
This OSHA 10 Hour Construction Industry training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file a complaint as well as how to identify, abate, avoid and prevent job related hazards on a construction site. The training covers a variety of construction safety and health hazards which a worker may encounter at a construction site. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards.
The minimum topic requirements are as follows:
Introduction to OSHA – 2 hours.
OSHA Focus Four Hazards – 4 hours.
Personal Protective and Lifesaving Equipment – 30 minutes.
Health Hazards in Construction – 30 minutes.
Elective – 2 hours.
Optional – 1 hour.
OSHA 10-HOURS FOR GENERAL INDUSTRY
This OSHA 10 Hour General Industry training program is intended to provide entry level general industry workers information about their rights, employer responsibilities, and how to file a complaint as well as how to identify, abate, avoid and prevent job related hazards on a job site. The training covers a variety of general industry safety and health hazards which a worker may encounter. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards.
The minimum topic requirements are as follows:
Introduction to OSHA – 2 hours.
Walking and Working Surfaces, including fall protection – 1 hour.
Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection – 1 hour. Electrical – 1 hour.
Personal Protective Equipment – 1 hour.
Hazard Communication – 1 hour.
Elective – 2 hours.
Optional – 1 hour.
OSHA 48-HOURS OCCUPATIONAL SAFETY AND HEALTH MANAGER
The 48 Hours Occupational Safety and Health Manager course
is a comprehensive and in depth training program for
professionals seeking to become adept in occupational safety
and health management. Designed to provide an advanced
understanding of safety regulations and leadership in safety
management, this program equip s participants with the
knowledge and skills required to excel in safety roles. The
course covers various aspects of safety, including regulatory
compliance, risk assessment, incident prevention, emergency
response, and safety culture promotion, enabling p articipants to
lead and maintain a culture of safety within their organizations.
Who Needs OSHA 48 Hours:
Safety managers and directors.
Occupational health and safety professionals.
Safety officers and coordinators.
Those responsible for safety oversight and
management.
Professionals in managerial roles committed to
enhancing safety.
132-HOURS OCCUPATIONAL SAFETY AND HEALTH PROFESSIONAL
In the realm of occupational safety and health (OSH), professionals play a pivotal role in ensuring workplace safety, compliance with regulations, and fostering a culture of health and well-being among employees. For those aiming to elevate their career in safety management, the OSHA 132-Hour OSH Professional certification stands out as a comprehensive and esteemed qualification. The OSHA 132-Hour OSH Professional certification is a rigorous training program designed to equip safety professionals with advanced knowledge, skills, and competencies necessary to effectively manage safety and health in various industries. Unlike traditional hour-based certifications, this program encompasses in-depth training across essential OSH domains, preparing participants to navigate complex safety challenges with confidence. The “OSHA 132-Hour OSH Professional” certification represents a significant milestone for safety professionals committed to excellence in occupational safety and health. By investing in this comprehensive training and certification, professionals not only expand their knowledge base and skills but also contribute to creating safer and healthier workplaces. This certification is a testament to dedication towards ensuring compliance, promoting safety culture, and safeguarding the well-being of employees across industries. Whether you’re looking to advance your career, enhance safety practices within your organization, or deepen your expertise in OSH management, the OSHA 132-Hour OSH Professional certification stands as a beacon of proficiency and commitment to occupational safety and health excellence.
Study Units
Introduction to Occupational Safety and Health (OSH)
OSH Legislation and Standards
Hazard Identification and Risk Assessment
Workplace Safety Programs and Policies
Incident Investigation and Reporting
Emergency Preparedness and Response
Health and Safety Audits and Inspections
Ergonomics and Workplace Design
Safety Training and Communication
Personal Protective Equipment (PPE)
Occupational Health and Hygiene
Construction Safety Electrical Safety
Machine and Equipment Safety
Behavioral Safety and Safety Culture
Occupational Stress Management
Environmental Management and Sustainability
40-HOURS HAZWOPER:
This online HAZWOPER course provides 40 hours of training on OSHA Hazardous Waste Operations and Emergency Response (HAZWOPER) standards. The course satisfies training requirements outlined in OSHA standards 29 CFR 1910.120 and 1926.65, which require workers to complete HAZWOPER training before starting work at an uncontrolled hazardous waste operation. HAZWOPER training prepares cleanup and emergency response workers to operate safely during a variety of scenarios involving hazardous substances. This training covers policies, practices and procedures that reduce the risk of injury and illness related to harmful exposures on the worksite.
Who Needs 40-Hour HAZWOPER Training?
Most workers who are new to uncontrolled hazardous waste or emergency response operations are required to complete 40 hours of HAZWOPER training. This includes general site workers (such as laborers and equipment operators) and on-site management and supervisors. Roles that require this training may include: Equipment operators General laborers Other general site workers On-site management and supervisory personnel.
Course Features:
This online course satisfies OSHA's 40 hour HAZWOPER training
requirement. It is fully narrated and contains interactive exercises and
real world examples. You have an unlimited number of attempts to
pass each module quiz and the final exam, which require a score of
70% or higher
Upon completion of the course, you'll receive an official certificate of
completion, which you can instantly download and print. You can
provide a certificate to your employer as proof of your training and
download duplicates anytime for your convenience.
40-Hour HAZWOPER Training Topics:
Types of Hazards
Personal Protective Equipment (PPE)
Levels of Protection
Decontamination
Toxicology
Fire Prevention
Hazardous Materials
Medical Surveillance
Site Emergencies
Drums and Containers
Fall Hazards
Electrocution
Struck by Hazards
Caught-in or -Between Hazards
Hazardous Communication
155-HOURS SPECIALIST (OIL & GAS INDUSTRY)
This program will help students understand how safety supervisor responsibilities apply to the oil and gas field, where it is important for safety concepts and efforts be targeted to onshore and offshore drilling. Emphasis is placed on gaining the knowledge and skills to assist in the establishment and management of a successful safety and health program.
Course Duration: 155 Hours
Course Outline:
1. Introduction to Safety Management
2. Effective Accident Investigation
3. Introduction to OSH Training
4. Hazard Analysis and Control
5. Hazard Communication Program
6. Conducting a Job Hazard Analysis
7. Personal Protective Equipment
8. Energy Control Program
9. Introduction to Ergonomics
10. Confined Space Program
11. Fall Protection Program
12. Electrical Safety Basics
13. Emergency Action Plans
14. Introduction to Machine Guarding
15. Introduction to Industrial Hygiene
16. Hearing Conservation Program Management
17. Blood borne Pathogens Program Management
18. Trench and Excavation Safety
19. Fall Protection in Construction
20. Oil and Gas Hazard Awareness
21. Well Site Preparation & Drilling Safety
22. Well Site Completion & Servicing Safety
23. Oil and Gas Well Inspection
24. Oil Spill Cleanup
25. Offshore Oil and Gas Safety
26. Offshore Oil and Gas Safety II
FOR MORE INFORMATION AND REGISTRATION:
CONTACT US: +91 9597228947
MAIL ID: praveenasafegensolution@gmail.com
ALL SAFETY COURSES AVAILABLE
.png)
Comments
Post a Comment